|
- Springfield Armory 1911 9mm Target Semi-Auto A1 Loaded- South OC
Springfield Armory 1911 9mm Target Semi-Auto A1 Loaded- South OC 5" Forged Stainless Steel handgun bought new in 2023 with less than 300 Rounds shot thru firearm
- A 9mm 1911 for CA. . . The Springfield Loaded target. . . a review
The Springfield Armory Loaded Target 9mma Review I cant lieIm a 1911 fan Ive carried them, even in uniform as a police officer, and have shot them for years However, since then, I have pretty much transitioned to 9mms, and mostly Glocks Now that Im retired, my options for a 9mm 1911 have narrowed Thats
- WTS M1a Loaded . 308 - Auburn $1600 - calguns. net
M1A Loaded in near brand new condition, with 1 10rd mag and the Springfield Armory range bag I personally havent fired it, action is pretty unused The loaded comes with the National Match barrel, front and rear sights, and a heavyweight Boyd's stock $1600 - Rifle and 1 10rd magazine Located in Auburn, willing to drive as
- Sig P320 CA Differences - calguns. net
There are no differences in the chassis part of the FCU The mag safety is part of the sear housing and is easily removed if desired (see the video Randall posted) The CA approved 320 is the M18 which already has a LCI Sig placed the "loaded when up" warning on the optics cover plate to make it a CLI So if you replace the plate with an optic, you'll remove the warning Lastly, there's a
- 308 with 30-30 ballistics? - calguns. net
To down load 308 ammo, using 300 Savage Data In order to safely shoot the many imported Mauser small rings that were rechambered to 7 62 CETME cartridge Which is dimensionally identical to 7 62 NATO and 308 Win But arsenal loaded to 42K PSI 300 Savage cartridge is a near ballistic twin to the venerable 30-30
- Supported vs Unsupported Glock barrels - Calguns. net
Hello all, My topic here will cover both Reloading and a Handgun, so please bear with me It has been said that Glocks dont like or the company doesnt recommend using reloaded ammo Any explanations on this Ive also heard some chatter regarding Supported vs Unsupported Barrels In the case of my G35, I have both
- 9mm 158gr Reload Data - Calguns. net
I searched the Internet for a 158gr 9mm load but could not find one Does anyone have a pet load for 9mm 158 grain bullets? I picked up a 2,000 to reload for 38 357 and figured I try them out on 9mm I am looking for subsonic loads I load 147gr bullets with 3 2 gra of Titegroup but Im open to a different powder Looking for
- Savage Axis Primary Extraction - calguns. net
So I took a fired PPU case and loaded it in the chamber Same issue, lifting the bolt normally I was still unable to pull it rearward I closed it again and lifted the bolt more sharply with a harder jolt and the bolt released and I was able to pull it rearward easily I was able to reproduce this repeatedly I resized them and they now extract perfectly So there is something in this camming
|
|
|