|
- How to unflash a sd card - balenaEtcher - balenaForums
Hi for a project i used etcher to flash a 2GB file into a 8GB sdcard now my sd card is ±50MB and i want my sdcard to return into 8GB Can you help me? PS:sorry if my english is bad i’m belgium
- Launching belanaDash on a non-standard TFT screen (some success)
Hello Gurus, I bought a cheap TFT 480x320 touchscreen from eBay advertised for use with Raspberry Pi 4 Understanding that there are some challenges there, I did make great progress and I’ll cover that Challenge: I can’t seem to get past the balena logo being shown on the screen to show a web page specified in LAUNCH_URL environment variable The logs say it’s showing, it’s just
- Browser block display issues with specific monitor
I’m testing out using Balena with the browser block to display KPI screens in a manufacturing environment We currently use MeLE stick PCs running windows to display on these, but the setup is a pain, and they tend to crash a lot I’ve re-flashed some of the Stick PCs with Balena, and it’s working really well on TVs and most of our monitors we use Problem I’m currently having is with
- BalenaEtcher support BTRFS - balenaEtcher - balenaForums
Does BalenaEtcher support clones with BTRFS linux format support without removing grub?
- Jetson orin nano eMMC : UART dev ttyTHS1 not working
Hello, I can’t use the UART dev ttyTHS1 correctly I tried with a GPS or a Bluetooth over UART Everything is working as expected when I don’t use a balena based Host but doesn’t work with Balena I talk about using pin 8 and 10 I know there is this link Jetson Nano UART ( dev ttyTHS1) not working but it doesn’t provide any solution I use OS version 6 4 0 For example, with Bluetooth
- Supervisor stuck in restart loop - Product support - balenaForums
A few hours ago the supervisor running on one of our devices started restarting endlessly I’ve attached the logs below but they dont seem particularly relevant, save for the “Received SIGTERM Exiting ” at the end Currently the system is up and operating from a user-perspective, but I’m nervous to do anything to fix the supervisor that might affect the users There is a window later
- Balena Dash Project Wont Display - balenaForums
I’m going through this tutorial to set up a digital picture frame, and I feel like I’ve gone through all the steps correctly, but my Raspberry Pi will only display the Balena logo and nothing else I’m using a Raspberry Pi Zero W and Win 10 if that helps, and I’m just using the standard Command Prompt there I’ve already set up the device and connected it to my project, which it
- Robustly changing network settings - balenaOS - balenaForums
Hello! I am evaluating Balena for use in an IoT project where physical access is very expensive It seems that the only built-in way to change network settings in BalenaOS is to change a file on the boot partition, and if someone makes a mistake the device is essentially bricked… Not ideal! I would like to have a way to change network settings with rollback I am aware that it’s possible
|
|
|