|
Canada-0-LABORATORIES ไดเรกทอรีที่ บริษัท
|
ข่าว บริษัท :
- RNode Flasher - liamcottle. github. io
• In Sideband you will need to enable Connect using Bluetooth in Hardware → RNode • If your device uses BLE you will also need to enable Device requires BLE in Hardware → RNode • Don't forget to restart Sideband for the setting changes to take effect, otherwise nothing will happen!
- GitHub - markqvist RNode_Firmware: RNode is an open, free and flexible . . .
It enables anyone to send and receive any kind of data over both short and very long distances RNodes can be used with many different kinds of programs and systems, but they are especially well suited for use with Reticulum RNode is not a product, and not any one specific device in particular
- RNode - An open, free and unrestricted digital radio transceiver
While reading through the documentation and use cases for Reticulum, I found the RNode firmware that is particularly well suited for use with the Reticulum network, but can also be used for other purposes as well The RNode firmware can be installed on the T-Beam LoRa boards
- Mirrors RNode_Firmware: Firmware for the RNode radio interface - RNode . . .
The RNode Firmware supports all transceiver modules based on Semtech SX1276, SX1278, SX1262, SX1268 and SX1280 chips, that have an SPI interface and expose the relevant DIO interrupt pins from the chip
- Installing RNode Firmware on Supported Devices
To install the RNode Firmware on your devices, run the RNode autoinstaller using this command: The installer will now ask you to insert the device you want to set up, scan for connected serial ports, and ask you a number of questions regarding the device
- RNode flasher
RNode web based flasher for ESP32 devices Select your device from the following list, making sure you select the correct frequency and board
- Fork of RNode_Firmware with integration of the microReticulum . . . - GitHub
This firmware can be easily installed on devices in the same way as RNode using the new fw-url switch to rnodeconf which allows firmware images to be pulled from an alternate repository
- RNODE: A Portable Unrestricted Digital Radio - Hackaday
The device can be standalone, perhaps attached to a mobile device via Wi-Fi, but it needs to be hooked up to a laptop for the really interesting applications
- The new RNode is a self-replicating, open and unrestricted . . . - Reddit
You can now use mobile RNodes around the coverage area, directly connected to your phones via bluetooth or USB to communicate Or you can add an RNode to each house in similar fashion as at your own property to extend the mesh, and just allow anyone on the local WiFi networks to reach each other
|
|